Wheel - Grey Rubber - 80kg - 200 x 32mm - Deep Groove Bearing
- FA PSB200
Grey tyred non-marking wheel, specially developed for floor polishers / scrubbers and other applications needing a non-marking tyre. Centre is white polypropylene, fitted with either plain bearings or ball bearings. The wheel is offset so the axle does not stick out.
Polisher / Scrubber Wheel Specifications:
- Capacity per Wheel kg: 80
- Diameter x Width mm: 200 x 32
- Hub Width x Bore mm/inch: 38 x 1/2
- Bearing: Deep Groove Bearing *
* These Wheels have 'Deep Groove' shielded bearings fitted to a toughened heavy duty housing which enables true running and extra strength. Deep groove bearings can last up to 3 times longer than normal pressed bearings.
Polisher / Scrubber Wheel Features:
- Non Marking Tyre
- Specially developed for floor polishers / scrubbers
- Wheel is offset so the axle does not stick out
Some tyre selection factors:
The harder the tyre, the less out-of-round the tyre will be under load, and the smaller the resulting force required to start the wheel from rest on smooth floors. Hard wheels have high load bearing capacity and reduce push effort on carpet
and soft surfaces but are very noisy on tiles and other hard surfaces and can also leave indentations on wooden floors.
The greater the resilience (bounciness/spring) of the tyre, the lower the sustained push effort required to pass over multiple obstacles (rough ground). That’s why wheelbarrows and other applications that involve rough ground use
pneumatic or rubber tyres.
Domed tyres require less force to swivel a wheel. Flat profiles spread load and prevent damage to floors at high load ratings.
Rubber tyres such as grey or hi-res blue rubber may not be suitable for dirty floors or areas near tool rooms, as particles such as swarf or pebbles can get stuck in the tyres (which may then cause damage to floors). A nylon or
polyurethane tyre material would be suitable due to its harder surface which resists particle embedment.
Reflex Equip carry a huge range of wheels at very competitive prices and first-class quality and performance, backed up with a manufacturer's warranty.
Contact Reflex Equip today for expert advice on the right Castor for your particular application